Fence Proximity Sprinkler Mount
B&T Wildfire Technologies Inc. is a wildfire technology company dedicated to developing innovative, field driven solutions that address the evolving challenges of wildfire risk mitigation. We are proud to announce the launch of our patent pending Fence Proximity Sprinkler Mount in Canada and the United States, a purpose built system designed to provide perimeter level protection by intercepting wildfire exposure before it reaches critical assets.
As wildfire risk continues to escalate across the Wildland Urban Interface, industrial sites and critical infrastructure increasingly require solutions that move beyond structure level suppression and instead establish proactive, defensible zones that reduce exposure, ignition potential, and fire intensity before flames reach buildings or equipment.
The Fence Proximity Sprinkler Mount was developed through direct operational wildfire experience in Wildland Urban Interface and industrial environments where conventional protection methods often fall short. While roof mounted sprinkler systems remain essential for structure defense, they do not address the vulnerability that exists along property boundaries where embers accumulate, surface fire advances, and radiant heat intensifies. Designed specifically for perimeter and proximity control, the Fence Proximity Sprinkler Mount creates a controlled humidification and wetting barrier around the boundary of a site, working to slow fire behavior, suppress ember ignition, and increase localized relative humidity.
By wetting fine fuels, grasses, debris, and fence materials while elevating ambient moisture levels, the system reduces the likelihood that a wildfire can advance close enough to threaten protected assets. Increased humidity along the perimeter lowers ignition probability from airborne embers, slows flame spread through receptive fuels, and reduces radiant heat transfer toward structures and infrastructure.
Unlike ground level perimeter systems, the Fence Proximity Sprinkler Mount positions the sprinkler at the apex of the fence line. This elevated placement allows water to project above and beyond the fence, improving spray reach, reducing shadowing caused by fencing materials, and establishing more consistent coverage on both sides of the boundary. In wildfire conditions where embers commonly collect along fence lines and travel on wind currents, this elevated perimeter barrier provides earlier interception of heat and ignition sources before they penetrate the protected area.
The Fence Proximity Sprinkler Mount is engineered to be fully interchangeable across the three most common fence configurations encountered in Wildland Urban Interface environments, including wooden fencing, chain link fencing, and individual fence posts. A single adaptable mounting architecture allows the system to be deployed seamlessly across mixed fence types without requiring multiple products or improvised field modifications. This adaptability is critical for real world deployments where fence styles frequently vary along a single perimeter or across large industrial sites.
Wooden Fence
For wooden fence applications, the mount incorporates an adjustable sliding clamp mechanism that allows it to securely seat onto the top rail or board of the fence. The sliding design enables the mount to accommodate common variations in fence width while providing a firm, compression based attachment without the need for permanent fasteners. Once engaged, the clamp forms a stable and level platform that resists rotation, vibration, and uplift under sustained water pressure and wind exposure. This ensures consistent sprinkler orientation, reliable spray patterns, and dependable performance during extended wildfire protection or irrigation operations.
Wooden Fence Post
For individual fence post applications, the system is designed to mount directly to vertical members using two supplied hex head fasteners. These fasteners draw the mount firmly against the fence post, creating a secure, load bearing connection that resists loosening under vibration, wind loading, and sustained water pressure. This attachment method provides a rigid and dependable mounting point without reliance on horizontal rails, making the system well suited for rural, agricultural, and perimeter fencing configurations where simplified or non conventional layouts are common. The result is consistent sprinkler alignment and reliable perimeter protection across a wide range of fence designs.
Chain Link Fence
For chain link fence applications commonly found around oil, gas, and industrial facilities, the mount seats directly on the top rail and is secured using two supplied U bolts with locking nuts. The U bolts clamp the top rail firmly into the mount, creating a rigid mechanical connection that prevents rotation, uplift, and lateral displacement during operation. The mount is designed to rest on the interior side of the fence line, using the fence fabric as an additional stabilizing surface to dampen vibration and resist movement under sustained water pressure and wind loading. This configuration maintains consistent sprinkler height and alignment while allowing rapid, repeatable installation along extended fence runs, supporting continuous perimeter protection in high risk environments.
The Fence Proximity Sprinkler Mount was specifically designed with energy, industrial, and critical infrastructure facilities in mind. Many of these sites are located in high risk Wildland Urban Interface zones and are typically enclosed by fencing that defines a clear boundary between managed industrial space and unmanaged surrounding fuels. These locations often contain control buildings, power systems, process equipment, and operational assets that cannot be easily relocated or hardened.
The Fence Proximity Sprinkler Mount is designed and manufactured in Canada using Canadian sourced stainless steel and paired with brass impact sprinklers. This material and manufacturing approach is deliberate and driven by wildfire specific performance requirements. Local fabrication ensures quality control, material traceability, and supply chain reliability, while allowing the system to be engineered, tested, and refined in the same Canadian environments it is intended to protect. Stainless steel and brass maintain structural integrity, spray consistency, and durability under sustained pressure, pump fluctuations, wind exposure, and elevated ambient temperatures where plastic components are prone to deformation, cracking, and failure.
When deployed, wildfire rated hose is run continuously along the inside of the fence perimeter. Fence Proximity Sprinkler Mounts are installed at approximately 30 feet intervals to create overlapping sprinkler coverage along the boundary. This spacing balances water demand with effective coverage and ensures consistent wetting and humidity generation across the entire perimeter. Once activated, the system delivers continuous water to each mount, producing a localized moisture barrier that reduces fire intensity near the fence line.
In wildfire scenarios where ember cast is a primary cause of structure and infrastructure loss, this perimeter humidity barrier functions as an early defense layer rather than a last line of protection. It helps interrupt ignition pathways before fire can reach buildings, equipment, or storage areas.
The system is supplied as a complete assembly including the mount, sprinkler, fittings, and adapters. This simplifies deployment, eliminates compatibility issues, and ensures dependable field performance. The mount is designed to support industry standard impact style sprinklers commonly used in wildfire protection, allowing predictable coverage and straightforward integration with existing pumps, hoses, and water supply systems already used in wildfire response and industrial operations.
Depending on site requirements, the Fence Proximity Sprinkler Mount can be installed as a permanent fixture or deployed seasonally and removed when wildfire risk subsides. This flexibility allows operators, municipalities, and property owners to scale perimeter protection based on fire danger ratings, insurance requirements, and operational needs without modifying or damaging existing fence infrastructure.
Beyond industrial use, the Fence Proximity Sprinkler Mount is equally effective for residential communities, agricultural operations, resorts, lodges, and critical facilities located in the Wildland Urban Interface. Properties with defined fence lines benefit from the ability to establish a controlled perimeter defense that complements roof level sprinkler systems and FireSmart fuel management practices. When paired with defensible space principles, perimeter humidification adds an active suppression layer that reinforces passive wildfire mitigation efforts.
The launch of the Fence Proximity Sprinkler Mount reflects B&T Wildfire Technologies Inc. commitment to designing field driven wildfire solutions informed by real operational experience. As wildfire risk continues to evolve, proactive perimeter defense will play an increasingly important role in protecting communities, infrastructure, and critical assets. The Fence Proximity Sprinkler Mount represents a deliberate shift toward purpose built, perimeter focused wildfire protection technology designed from the field up and protected through ongoing Canadian patent filings.
View specifications, features, and deployment details for the Fence Proximity Sprinkler Mount by clicking the link.